Kohen Mina


How do I know if my gutters need to be replaced?

Sometimes minor gutter issues can go unnoticed, and it’s not until you have a widespread problem that they get picked up. To protect your home from potentially costly and avoidable damage, it pays to routinely inspect the condition of your gutters. If you haven’t investigated your gutters for some time, or ever, here are some telltale signs that they need replacing.

Water issues

Some gutter problems are more obvious than others, and a common sign that something isn’t right is water not directing away as it should. If your gutters are filling up with water and spilling over, it may be just because they’ve collected debris such as leaves and twigs, and it is preventing the water from running away. In this scenario, a simple clean out should rectify the issue. If your gutters are clean but water is still collecting in them, then your downpipes might have a blockage, or it may be a bigger problem such as improper installation. If after cleaning out your gutters and checking for blockages, they still fill with water, it’s worth getting a professional out to take a look at them. Leaving your gutters as is and allowing water to pool in them can cause damage to your home and the foundation. A professional gutter specialist can advise you of the problem and whether it’s a repairable job or it’s better to replace them altogether.


The smallest fracture in your guttering will lead to water seeping out and onto the fascia and house. The problem with little cracks is that they often go undetected as they can be difficult to see unless you are up close and examining them. The amount of water escaping through them isn’t always noticeable, to begin with, however over time, these fractures will continue to expand, and this is when they typically get noticed by the homeowner and the potential for widespread damage is drastically increased if not seen to quickly. Minor fractures may be repairable whereas larger ones might require complete replacement.

Separated or sagging gutters

For your gutters to work sufficiently the entire contraption needs to be intact and in proper working order. Separation of guttering can happen for a variety of reasons, and one of the more common ones is deterioration of the mechanisms holding the sections together. Another is lack of maintenance. By inspecting and taking care of your gutters, you can help to avoid significant water damage to your property and the areas surrounding it. Sagging gutters, again, are often caused by a build-up of debris, this extra weight places strain on the fixings and can cause them to sag and pull away. There’s a good chance that your home will be flooded with water if your gutters are in such condition, and getting them fixed should be a priority to avoid extensive damage.

Blistering or bubbling paint

There’s no denying the gutters of our homes are exposed to tough conditions, and over time, paint can break down in this area. You can usually determine what is wear and tear and what is water damage from its appearance. Older paint will often flake off, water damaged paint, on the other hand, will normally blister or bubble. If you have noticed there are some areas with this around your guttering, it’s a possibility that inferior guttering is at fault. Whether you can repair it or have to replace it, will depend on the extent of the damage.

Eroded landscaping

When water has nowhere to go or is not directed away to the downpipes, it can bucket down onto the house and landscaping situated underneath it. If you’ve had rain of late and your plants that are directly below your guttering are looking washed out or flattened, it might be time for a gutter replacement.

Organic growth

Gutters that are clogged with debris or have cracks will most certainly have drainage problems. As the water is not directed away and the home and the foundation bear the brunt of the excess moisture, this can provide ideal conditions for organic growth such as mould and mildew. If you have either of these contaminants making themselves at home at your place, the first place to look at for potentials causes is your guttering. Mould and mildew are not only unsightly and bad for your health but, if the gutter issue is left unfixed, it can cause rot and structural damage to your property.

Rust spots

Rusty gutters are seen a lot in older homes, where steel guttering was generally used. Small areas of rust are usually treatable as a temporary fix, but if it is extensive, the only solution may be an entire gutter replacement.

When the right materials are used, and the correct installation processes are undertaken, your guttering should last for a good 20 years or more. That is if you are maintaining them regularly and no external factors such as storms or trees affect their integrity. By taking the time to look after your gutters, you can extend their lifespan and ensure they are doing their job properly. If your gutters have seen better days and need repairing or replacing, contact our highly skilled team of gutter professionals here at A.I Gutter and Roofing. We can look after all your guttering and roofing needs and make sure they are in tip-top shape.

read more

Here are 10 of the top reasons why cleaning your gutters is beneficial for your home and family

Houses don’t come cheap, so you want to be sure you are looking after yours to avoid costly damage. One effective way of doing this is by cleaning out your gutters. While they may seem insignificant, if they are not up to par, they can have disastrous consequences on the condition of your home. Here are 10 reasons why you shouldn’t ignore your gutter maintenance if it is due.

ONE. It can cause structural issues

Problems with the integrity of your home is never a good thing, and clogged gutters can most certainly cause this. Water is the culprit. When it rains and water can’t run away freely, it can pool at the foundation of your home and spill into your roof cavity. If the problem is not fixed, it can cause widespread damage.

TWO. Prevents unwanted pests

Gutters that are full of leaves, twigs, and debris, along with pockets of water and food sources such as fungi, make the ideal environment for unwanted pests such as rodents to set up home. If you have rats or similar living in your gutters, you can bet your bottom dollar that they’ll get onto your home. These pests can carry diseases and chew through electrical work. The less inviting your gutters are, the less likely that pests such as these will have a long-term residence at your place.

THREE. Maintain your homes appearance and value

Intact gutters not only look better, but they can help your home to keep its value. This is especially true if your home has suffered because of poor guttering. If you would like to sell, this can be a huge drawback for prospective buyers. Gutter problems will often get picked up in the building and pest inspection. If your gutters need repairing or have caused damage, the buyer may request a reduction on their offer or pull out altogether. If you plan on selling anytime in the near or distant future, make sure your gutters are in proper working order.

FOUR. Protect your families health

When you think of compromised guttering, your family’s health probably isn’t the first thing that comes to mind, however, excess water and moisture build-up can cause an array of issues such as mould and bacteria growth. Both of which can be hazardous to one’s health. If you have pests residing in your gutters, this can make your family more susceptible to diseases, as many are easily transmissible to humans.

FIVE. Keep your landscaping alive

If your gutters aren’t functioning as they should, and they are broken or full of debris, when it rains, instead of the water heading to the downpipes, it will overflow from the guttering and flood your plants and greenery.

SIX. Extend the lifespan of your roof

When water is directed away from your roof and not towards it, you can extend its lifespan drastically. Considering your roof is integral to keeping your home dry and protected from the elements, it’s key that the necessary steps are taken to keep it in optimal working order.

SEVEN. Prevent your gutters from prematurely deteriorating

Cleaning your gutters often will ensure they don’t get weighed down from a build-up of debris or water. Excessive weight in your gutters can place strain on the contraption and cause them to pull away or break as a result.

EIGHT. Allows you see to minor issues before they become major ones

Cleaning out your gutters is a good opportunity for you to inspect them. This can allow you to fix minor issues before they have a chance to become major ones. This can give you a lot of headaches and money.

NINE. Prevent your gutters from rusting out

Older styles of guttering are susceptible to rust, and if water is left to sit in them for extended periods, this will progress the problem at a rapid rate. Rust will eat away at the gutters and create holes in the mechanism. Instead of the water directing to the downpipes, it seeps out through the holes and onto the house.

TEN. Protect your home in bushfire season

Bushfires can occur at any time and anywhere. If your gutters are full of dry leaf litter and twigs and there’s a fire nearby, your home is more at risk of catching alight. Embers can fly some distance in the wind, and if they land in a gutter brimming with dead organic matter, it’s extremely likely that it’ll ignite and before you know it, your entire roof is engulfed in flames. Even if you don’t live in a bushfire prone area, you never know when a fire may occur, for example, a neighbouring housefire. It’s always better to be safe than sorry, and as a bonus, you are reaping all the benefits mentioned above as well.

As you can see, there are many benefits to cleaning out your gutters, a little effort goes a long way to keeping you, your family, and your home safe.

We understand that cleaning out gutters is a messy job, and it can be easy to put it on the back burner for a later date. Why tackle it yourself when you can call in the professionals here at Global Vac Gutter Cleaning? We use vacuum technology and can clean your gutters quickly, leaving no mess behind. Contact us today.

read more

A Great guide on Asphalt Paving Resurfacing. What are the benefits?

If you have asphalt paving at your place and it’s seen better days, you may be contemplating repairing or replacing it to bring it back to life. Have you considered resurfacing? In this post, we’ll share everything you need to know about asphalt paving resurfacing to help you determine whether it’s a suitable solution for your pavement or not.

Understanding the differences between asphalt repairs, resurfacing and replacements

It’s important to understand what the different asphalt services are to be able to choose the most suitable option. We’ll explain the differences between the three.

Replacement – So, this one is self-explanatory. It’s the process of ripping up your old pavement and essentially starting again.

Repairing – Repairs are usually done to fix up problem areas such as potholes or cracks. The remaining pavement is usually in otherwise good condition.

Resurfacing – Is the process of installing a new layer of asphalt over an existing pavement. This is typically the go-to choice when the sub-grade is in sound condition, but the surface has worn or has oxidised.

Establishing the condition of your pavement

The biggest deciding factor when weighing up between a replacement, repair or resurfacing is the current condition of your pavement. If it has significantly deteriorated, a repair or resurfacing may be off the cards as the foundation is not suitable for relaying asphalt over it.

Benefits of resurfacing your asphalt pavement

Can be more cost-effective

In most instances, you could expect pavement resurfacing to be more cost-effective than an entire replacement. The process of resurfacing is significantly quicker than a replacement as the labour, equipment and materials needed is typically less. If your subgrade is still in good nick and you’re tossing up between a replacement or resurfacing, resurfacing can save you some money, and you’ll still get the same durability and lifespan.

More convenient

While paving contractors will aim to complete their installations in a timely manner, there is less involved with resurfacing than a replacement and therefore, the duration that you’ll have tradies at your home is minimised. This is more convenient, allowing you to enjoy your peace and quiet.

It can boost your curb appeal

Pavements that look worse for wear or are riddled with holes can make your property look unkempt. Laying fresh asphalt down can give your pavement a brand new and fresh look. This can help to boost your home or businesses curb appeal. If you are planning on selling, this is always a good thing.

Makes your home safer

There’s a good chance that the asphalt areas at your home are used to walk on as well as driving. Damaged asphalt can be a hazard, especially when the sun starts to go down. Resurfacing provides a smooth surface that is soft underfoot and safe.

Some common questions we get asked about resurfacing

How do I know if my subgrade is in good enough condition for resurfacing?

In most cases, the paving contractor will evaluate the condition of the subgrade by conducting core testing. They will also look for issues such as extensive damage or alligator cracks on the surface, as this may deem the pavement unsuitable for an overlay. From the testing and the inspection, they’ll be able to determine whether it’s suitable or not.

How long should an asphalt overlay last?

You can expect asphalt resurfacing to last for a good decade or so however, improper use and lack of maintenance may see it wear prematurely. The installation technique can also affect its longevity, so always ensure that you hire a reputable company to lay your asphalt to ensure it lasts.

Why should I choose resurfacing over a pothole repair?

Pothole repairs should only be done as a short-term remedy. It’s likely if you have one pothole, another will form in another area. This is because water has had the chance to get under the surface and into the subgrade material. Resurfacing gives the entire surface a new finish and is much more effective than having to continually get potholes repaired. Plus, it looks better.

Do I have to maintain my asphalt pavement?

The short answer? Yes. The most effective way to prevent your asphalt pavement from damage is by looking after it. Have a chat with your contractor about what you can be doing to extend the lifespan of your pavement. The less you have to resurface it, the less money it is for you. The good news is having an asphalt pavement doesn’t mean you have to spend a lot of time maintaining it, in fact, it’s quite the opposite. A quick sweep once a week will help to lift dirt and remove debris that has collected on it. While it may seem insignificant, if dirt and debris are left on the surface, and it is driven on, over time it can wear away at the asphalt. Always ensure you are following the maintenance guidelines as outlined by your contractor for the best results.

Always consult with a professional

It may be tempting to try and fix your asphalt pavement yourself but, it is a big job that requires a lot of planning and should always be left to the professionals. Here at Colossal Allies Asphalt, we cover everything asphalt and can help you to get your pavement looking brand new again. Contact us today for more information.

read more

5 Important things to consider before you start your paving project

Paving is an economical and effective way to spruce up an outdoor area, but it needs to be done properly to ensure it maintains its form and appearance. Before laying your pavers, you should ensure you don’t forget to consider these 5 important things. Let’s take a look.

Have a plan

Installing a new hardscaping area is exciting, and you may have the perfect pavers in mind, but before you go and purchase them, first and foremost, you need to have a plan in place. You need to consider the layout of the area, drainage and whether you are going to hire a professional to install your pavers or if you are going to complete the work yourself. If you decide to DIY, make sure you do plenty of research first. Getting it wrong can cause a variety of issues. Take your time to investigate the different styles of pavers, their durability, and gather as much inspiration as you can. This will ensure you end up with a finished product that you are entirely satisfied with.

Choose the right pavers for the job

There are tonnes of paver materials to choose from, and they all vary in stain resistance, weight-bearing capabilities, non-slip benefits, and so much more. The paver you choose must be up to the job. To give you an example, using thin pavers that are designed for paths and walkways for a driveway, are unlikely to withstand constant pressure from heavy vehicles, and they are probably going to crack. The same applies to poolside pavers, they need to be able to withstand exposure to salt or chlorine, as well as have great traction and non-slip properties. To get a long-lasting finish, you will also need to consider whether you want to set the pavers in sand or mortar. Some are better suited than others depending on the intended purpose of the hardscaping project.

Pick the perfect colour for the job

Many pavers are made from natural materials such as stone, and they often feature swirls, marbles and speckles of various hues and colours, in fact, no two natural stone pavers are alike. The paver you choose should work well with the rest of your exterior. This shouldn’t be too hard as most pavers suit various styles of homes. The colour can also affect the functionality of your paved area. For example, dark coloured pavers tend to heat up in the hot summer sun and walking on them barefoot can cause burns. On the other hand, using light coloured pavers such as white can cause glare and reflect the sunlight up and towards your face. Both of these factors are worth considering when choosing your pavers.

The size and layout

The layout of the intended paved area can influence the size of pavers you can use and the pattern. If the area you are paving is relatively small, you can still use large pavers, you will just have to make sure they fit, allowing enough room for gaps between them. Placing them too close together may see them chip and deteriorate sooner than they should. Using bigger pavers in a small area means less time is required to install them, and less sand is needed to fill the paver joints.

Estimate your materials

Over or under ordering materials can be a costly or inconvenient mistake. You should break down each material you need to complete the job and the cost associated with it. Some of these include the subgrade material, paver quantities, sand, or mortar. You can work out how much material you need by measuring out the area you plan on paving. Once you have the width and length measured out, you multiply the two together. This will give the total square metres that you need. To cover breakages, it is always a good idea to add 5% on top of the total number so, you are not left short. If you are doing the work yourself, you will also need to factor in the equipment and tools that you’ll need. The last thing you want is to have your pavers delivered and materials only to have to stop after you’ve just started to run to the shops, especially if you are setting the pavers in mortar. Make sure you have everything you need from the get-go to ensure the installation process runs smoothly and you get a professional-looking result.

To get a high-quality finish on your paving project, it pays to hire a qualified paving contractor. They can offer sound advice on which paver types are best suited to the job and the best pattern and material choices given the style of your home. Not only that, but they’ll make sure the correct drainage solutions are implemented to prevent water from pooling or ending up in your house when it rains. Proper drainage is a common element DIYers fail to get right. Most reputable contractors offer a guarantee on their workmanship, so you’ll be covered if anything unforeseen happens to your newly paved area.

If you’re looking for stunning pavers for your place, or you simply have some questions about a paving project, get in touch with our friendly team here at Bonita Stone. We have a paving background ourselves and have a collection of all Australian made pavers on offer. Contact us today for more information.

read more

5 Tips for Successful Contract Management

Image source: Zycus

Whether you are a business owner or not, contracts can be tricky and confusing. As a result of this, many businesses struggle to maintain successful contract management. The situation can be worse if you are managing multiple contracts or as the business is growing, it can be difficult to keep track of everything. This can lead to missed deadlines and missed opportunities for new clients. Here are 5 tips for successful contract management.

What is Contract Management?

Contract management is the process of managing information related to your contracts. Businesses need to have good contract management systems in place because a good contract management system will help you to:

  • keep track of payments and deadlines
  • Stay compliant with the terms of your contracts
  • Improve contractual processes
  • Maintain relationships with suppliers and clients

A good contract management system such as the one from contractsafe can also help you ensure that you are correctly getting the best deal from your suppliers.

Tips for Successful Contract Management

1.     Come Up With a Good Contract Team

Image source: Davis Business Law

Successful contract management requires a resourceful team to solve any predictable and unpredictable issues that may arise. The team should know how to relate with different stakeholders and resolve any issue before it escalates.

Before setting up your contract management team, ensure that they understand:

  • Every operational aspect of any department or service that the company outsources
  • The responsibilities of every supplier or business partner
  • The outcomes of a business and how to achieve the outcomes
  • Possible legal issues related to the contracts and how to resolve them

A good contract team ensures that there is someone responsible for everything. Such a team makes it easier to manage contracts and solve problems as soon as they arise.

2. Invest in a Strong Document Storage and Sharing Facility

Contracts can be hard to manage if you do not have strong document storage and sharing facility. Since most contracts have a life cycle of more than a year, storing them safely and securely is necessary. It is also important to ensure that the documents are well-organized.

The document storage and sharing facility should be on the cloud to make it easier for the contract management team members to access them anytime and from anywhere. At the same time, be sure that your sensitive information is safe from cyber-attacks. You will need a reliable malware and virus detector.

3. Be Aware of Legal Clauses

Legal clauses are present in every contract, and businesses need to know what they entail. The clauses may be essential or non-essential, and you should know which ones to prioritize. You can then work on reducing the non-essential clauses to an acceptable level.

Try to understand what each clause entails before agreeing to its demands. It is also important to compare your contract to similar contracts in the market. Keeping your legal team involved in the contract is also essential, even if you expect any disputes. It will help you ensure that you are well covered if the other party takes advantage of your ignorance.

4. Have an Escape Route

The relationship between a business and its supplier can change with time. Your contract should have an escape route. How will you get out of the contract if you need to? State the terms that can nullify the contract and develop rules for ending a contract before entering into a contractual agreement with any party. While setting the terms for nullifying contracts, be wary of court cases for breach of contract.

An escape clause allows you and the supplier to end the contract with minimal losses.  If your supplier develops an unsafe product or takes advantage of you, it is better to end the contract and find another supplier.

5. Use Contractsafe Software for Contract Management

Contractsafe is software for contract management. It helps manage every part of the contract lifecycle, from initializing the process to negotiating and drafting a contract to management. Using this software automatically ensures compliance with the terms of the contract. This saves businesses from any legal and financial costs that could arise from non-compliance. With this software, you will be able to access any contract when you need it, allowing you to leverage the terms of a contract on time.

What are the Benefits of Contract Management?

There are many benefits to good contract management, some of which include:

  • Staying abreast of terms and conditions
  • Staying abreast of deadlines
  • Reducing the chance of audits
  • Better information retention
  • Compliance with company policies and regulations
  • Automating tasks involved in contract management

Start practicing good contract management, and your business will enjoy the benefits above.


Proper contract management is essential in every business. Start practicing the tips above for successful contract management to save your business from problems that come with poor contract management.

read more

The Best Pool Trends We Expect To See In The Future

Once you decide to construct a swimming pool, the next step is planning. The wide choices in construction materials, lighting, and landscaping can make the planning process difficult. The swimming pool is an expensive investment that stays with you for the long term. Renovating a swimming pool is difficult. It is necessary that you get the planning process right in the construction stage itself to avoid regrets later on.

The trends in swimming pool construction keep on changing. We give you some latest trends that will enable you to construct a trendy pool in your backyard.

Size matters

Traditionally, a large swimming pool was considered the mark of luxury. People have started realizing the drawbacks of constructing a large pool. A large pool will eat up most of the space in your backyard. You will also end up with lifelong maintenance expenses. A large pool is difficult to clean and costly to heat.

This explains the growing trend of small pools. Small pools are easier to clean and heat.

Fibreglass pools are so easy to brush that you can do it yourself. Small pools leave plenty of space for other features like an outdoor kitchen, bar, seating area etc. Fibreglass pools are available in many shapes and sizes suitable for various backyards. Small pools have a slick look.

Shallow pool

How many of us use our pools for diving? Not many. Unless you intend to use your pool for diving, building a shallow pool makes sense. Shallow pools are safe for all age groups. They are also easy to clean and heat. Shallow pools incur fewer excavation costs during the construction stage.

Shallow pools require less water. They are ideal for sports and exercises. These are some reasons that shallow pools are gaining in popularity.

Seating in the pool

Pool parties are becoming trendy. They are more popular in summer. A pool is being recognized as an entertainment venue. People love to hang around near the pool or inside the pool. Lounging in the pool with a good book on a hot summer day sounds like bliss.

This makes pool ledges or bars more important. Large Fibreglass Pools come with pre-fitted ledges and steps at no extra cost. You can place loungers or other seating furniture in the pool. This seating arrangement is helpful during pool parties and family gatherings. They can also help parents to supervise their kids or senior citizens to rest between laps.

Strong colored pools

Mention pool and the color blue comes to your mind. For the longest time, white and blue were associated with the pool. Some people even found dark-colored pools repulsive. But now the trend is changing. The younger generation is choosing dark-toned pools.

Dark-colored pools have some benefits – they keep the water warm by retaining sunlight. They also hide minute dust and debris. Combined with the right landscape, dark-colored pools can make your backyard look warm and inviting. Dark-colored pools are suitable for tropical-themed backyards as well as modern houses. Fibreglass pools are available in a variety of dark shades.

Pool lighting

Lighting is necessary to keep the pool area safe. Halogen lights consume more energy and have a shorter lifespan. But the arrival of LED lights has changed the pool lighting scene. LED lights last longer and consume less energy. They can be programmed, and they are available in an array of colors. Putting different colored LED lights can give a mesmerizing effect to the pool. It can also change the color of the pool water. Lighting can also be used to differentiate between the deep end and shallow end of the pool. There are plenty of options in lights like floodlights, floating lights, flush-mounted lights and surface mounted lights. A well-lit pool can be calming to look at even when you are not using it.

Plants and natural elements

Adding plants to landscaping has many benefits. Plants like sage, lavender, mint, rosemary and basil have pest repellent qualities. They also give out a nice aroma in your pool area. Plants can also give privacy and shade to your poolside. Adding rocks and woods will give your backyard a rustic aura.

Water features

Water features can drastically alter the look of your pool. You have a wide choice between bubblers, rain curtains, sconces, scuppers and water walls. Water features can have a calming sound. A well-lit water feature gives the pool an exquisite appearance.

Fire pits

Fire pits are another trendy option. Fire pits can be portable or fixed. They can be customized or ready-made. They are available in a variety of materials like steel, stone, wood, concrete, etc. You can select one according to your budget. Adding dried herbs like sage, rosemary leaves in the fire pit will keep pests away from your pool area.

Fire pits can be built inside the pool, in the seating area or near the pool. The combination of fire and water gives a beautiful effect. Fire pits give warmth to your pool area.

Latest disinfecting systems

Traditionally, chlorine has been used to disinfect the pool. But chlorine has certain side effects. More and more people are moving away from using chlorine for sanitizing the pool. Saltwater chlorinators are gaining popularity due to the fresher water produced by them. Saltwater chlorinators work well with fibreglass pools. UV pool sanitation systems and Ozone pool system are some other systems which are in vogue.

Pool automation

Building a pool is easy. Maintaining it is the difficult part. Ignoring pool maintenance can make it unusable. This is where automation comes in. You can choose robotic pool cleaners for pool cleaning. You can fully automate your pool or choose automatic systems for pool monitoring or cleaning. Smart pool monitoring systems will scan your pool water quality and alert you about the need to add chemicals.

Installing a complete automation system will allow you to control the lighting, heating and cleaning of your pool through an app on your smartphone. Your pool builder will help you in selecting a system suitable to your budget and requirement.

read more

Backyard pool ideas on a budget

Most homeowners would like to have a swimming pool in their backyard. It allows them to have a great time relaxing in the pool with family. They can also organize pool parties and become popular socially. The main problem that most families face is with the budget. The common perception is that swimming pools are expensive. Many budget options are available to help people get a pool in their backyard. The article explores all these options.

Plan well

Planning is the key when you want a budget pool. With proper planning, you can make your dream come true. Here are some of the things you need to consider at the planning stage:

  • You need to look at the space available in the backyard. Depending on the space available, you can plan the right kind of swimming pool. The smallest type of pool is a plunge pool that can cost around $13,000 (2.4 m diameter). The cheapest pool is a container pool that may not look great but does its job.
  • In case there is no space, you need to work out if you can make space. This may be possible by shifting things. In case there is no space in the backyard, you can even make your pool in the front yard.
  • You can get swimming pools in any price range. The sky is the limit. This is why at the planning stage, you need to decide on a budget. Decide how much you can afford. You can also cut costs if needed, so you get your dream pool.
  • There are other things to consider at the planning stage. The sloping in your backyard is a factor. If your house is enclosed on all sides by the property, construction work can be a problem. If there are power cables nearby or water pipes, it makes the job even difficult. For each of these issues, there is a solution. You need to plan for it.
  • There are two main types of pools. An above the ground pool is the easiest one to fit. All it needs is concrete flooring or even a level surface. The pool is ready-made, and it would be brought and installed in your home. The other type of pool is on the ground. This looks better but is more expensive. You would need to excavate land for this. It costs time and money.
  • The best thing to do is to talk to a pool consultant/contractor. Ask them to carry out a site visit. Then based on their recommendations, you can make a decision.
  • Swimming pools come in different materials. The best option is fibreglass. These pools are ready-made and can be directly installed. Concrete pools, on the other hand, need to be constructed on-site. You also have vinyl pools that are cheap but difficult to maintain.
  • You also need to consider maintenance costs. Pools require a filtration system. The cost of buying the system and running costs should be kept in mind.

Decision time

Once the planning stage is done, you need to make a decision. Since the budget is known, you can now talk to contractors/vendors about rates. The initial planning would have helped you understand the expenses involved. You will also have decided on the type of pool for your home. Based on this, talk to different contractors. Get quotations from them. Ensure that the quotation covers all expenses, including installation, transport, etc. Compare the quotes and then choose one vendor. The vendor must be able to take approvals from local authorities.

Design ideas

There are different types of swimming pools with different shapes and sizes, small medium and Large Fibreglass Pools. The type and design you choose depend on how much space you have and your budget.

You can keep the following ideas in mind while designing the pool.

  • The plunge pool is the ideal option when you are looking for a budget pool. It is a pool that looks good, allows you to swim and relax, and does not cost too much.
  • An above the ground plunge pool is the cheapest option. In case you have a little more money, you can select a pool within the ground. This pool will enhance the look of your home and its value. It is a little more expensive, but the money would be worth it.
  • Plunge pools come in different sizes. The smallest would be 2.85 metres long and 2.1 metres wide. Large plunge pools would be 6.2 metres long and 3.39 metres wide. The depth of the pool would be around 1.2 to 1.7 metres at the deep end.
  • To make your budget pool look good you can surround it with landscaping. Simple arrangements like making a garden with shrubs enhance the appearance of the pool. It also gives you privacy from any nosy neighbors. If you already have landscaping, you can plan your pool around it.
  • If space is at a premium, you can even have the entry to the pool from the door of your home. This is a great idea to save space and allow you to directly enter the home.
  • A small deck near the pool will allow you to spend time relaxing. You can even use the deck to organize pool parties.
  • If space and budget are at a premium, you can opt for a spa pool (also known as spool). This is a small pool with limited space for swimming but has a spa for you to relax. This is a good option for people who want therapy to deal with problems like arthritis, body aches, etc.
  • If you have space horizontally, you can even consider a lap pool. This pool is around 10.34 metres long and 2.78 metres wide. This pool is ideal if you wish to practice swimming daily.

As you would have observed, there are many options available if you want a budget swimming pool. You need to consider the space available in your backyard, your budget, and your needs before deciding. You can contact a pool consultant or contractor to get more details.

read more

Cheap swimming pools-are they really worth it?

Have you been looking forward to setting up your own private swimming pool for sometime now? If true, then you would be one of many who would wish to own a pool. But most of us have no idea about its type, cost, and continued maintenance requirement. There are so many types of pools out there that it’s easy to be lost among options. The pool market has been growing rapidly over the years. In this article we look to provide a thorough understanding of pools and its associated features. Once through with the article, you would have a much better understanding of the pool market.

Private Swimming Pool – Are they a good idea?

Private swimming pool is a dream of many. Everybody likes to have their own personal pool to laze around in a summer afternoon. During the summers, as the average temperature increases every year, pools will be necessary in the future. However, the cost associated with installing and maintaining a swimming pool often deter people. The space is also another major concern for many households. Then comes many other aspects such as material used for construction, where to put up the pool and others.

Lets us discuss every aspect of swimming pools and understand how efficient a system and cost effective can it really be.

Before Buying A Pool

Before you set out to buy a pool, there are certain parameters of pools that should be understood. As you don’t buy pools every and once installed, they will be part of your space for years, here are some aspects one needs to be mindful about.

1) Size Determines Costs – The size is a major determinant of pool costs. So larger the pool size, the higher its costs. Larger pools also cost more to manufacture, transport and install. The maintenance cost implied with large pool size is higher as the filtering system, cleaning system and water intake are more by default.

2) Material Used For Manufacturing – Materials formulate the next base cost for a pool. Once the size is determined, the cost of raw material would reflect the overall cost. There are a variety of options when it comes to raw materials. Plastic pools are the cheapest option available out there, but they are not built to last long. fibreglass is an efficient option popular nowadays. Other materials would include concrete.

3) Design Feature – The design of the pool also determines its final cost. Simple rectangle designs with no added features are the most cost effective options. As more elements like steps, Jacuzzi, slopes and slides are included in the design, the cost of pools increases.

4) In Ground vs Above Ground – There are basically two types of pools. Ones that are dug into the ground and above the ground pools. The type of pool would reflect directly to the installation cost of the pool. Usually, above ground pools cost less to install as they are placed atop a concrete slab. The installation are significantly less when compared with in ground pools. In ground pools need to installed into a dug out space. The labor cost adds to the overall cost of in ground pools.

5) Site of the Pool – The location of the pool site is another major cost implication. Where your pool will be installed would reflect the effort behind transport and installation. Open pools in ground level are cheaper to install. More custom designs like terrace pools or infinity pools are expensive as their installation costs rise.

How To Choose Your Type Of Pool?

Now that we understood the different aspects involved in installing a swimming pool, we need to analyze it with our situation. Before setting forth to buy your dream pool, make a list of conditions that’s applicable to your case.

1) Choose Your Site Well – In Ground or Above ground, that would be a major choice. So choose a site best suited to your need. If you space is tight, you can opt for in-ground as it doesn’t eat into existing space.

2) Choose Your Size based on the number of people expected to use the pool. You don’t want your pool to get cramped for space when everybody in the family decides to use it together.

3) Plan Your Maintenance costs well in advance. As maintenance costs will be incurred every month, plan them in advance. Pools require regular cleaning and re-surfacing work after certain intervals. This need to be considered into your costs.

4) Choose a design best suited to your size. Customized designs work well for personal indoor designs. If you have a special requirement of a kids pool, try to add them to your pool design. It can save lot of space and cost.

5) If cost is a major constraint, Small Fibreglass Pools would be the right choice. They are efficient, reliable and lasts a long time when properly maintained. We will discuss Fibreglass pools in detail below.

Fibreglass Pools

Fibreglass pools have lately become popular among owners. They are not only cost effective, but with proper care can lasts for a lifetime. The companies that manufacture fibreglass pools would essentially construct a Fibreglass shell. The shell needs to be fixed onto a surface. The installation of fibreglass pools are relatively easier which reflects on to the cost element. The easy design and installation aspect of Fibreglass pools allows them to be fixed onto any type of surfaces like slopes, cliffs etc.

Fibreglass do not provide much customization option as they come pre-designed. However, buyers can choose from a wide plethora of design and shapes. So buyers have ample choices to decide from.

Features Of A Fibreglass Pool

  • Bacteria and Algae resistant surface
  • Easy to install
  • Low cost compared to concrete designs
  • Long lasting design, sturdy
  • Low Maintenance cost

The Fibreglass pools feature protection against bacteria and algae. So the pools does not require major cleaning and the need for resurfacing is also reduced. This overall reduces the maintenance burden for the buyers.

read more

Move Your Office with Ease – Here Are 4 Things to Consider

Whether it’s business expansion or about scaling back a business, moving an office is a task that demands perfection. Additionally, the shift is not just a mere change for any business owner; in fact, it’s something the organization’s employees need to adapt as well.

Therefore, it becomes more than essential to move ahead of time and seek professional moving services in Raleigh NC or nearby based on one’s location. This post highlights 4 tips that a business should consider while moving its office to a new location.

1.   Hiring a person to manage the entire process

Moving offices might seem like a daunting task for many, so hiring a single person to manage the whole procedure is a wise idea. With this step, business owners can not only minimize the hustle-bustle of the process, but it will also help to update employees to the minute regarding the onboarding process. In addition, the person will be responsible for communicating, appointing, and operating the assigned company for the entire moving process.

2.   Moving kits for employees

While moving, it’s important to take care of the employee’s needs. After all, they are the pillars of any successful organization. Therefore, to keep a smile on every employee’s face, it’s suggested to discuss with the moving company for arrangements of moving kits for employees. The requirements for various employees might differ as some may have plenty of paper materials, while others might have electronics.

In addition, it would be great if the moving company could arrange to label the boxes dedicated to the employee’s belongings. For example, an employee’s belongings can be labeled by their Last name – Department name – Material name. This way, the process will be a lot smoother and more convenient for all.

3.   Professional consultation

When it’s about moving an entire office, moving peripherals like work-related computers, printers, files, and so on is indispensable, and so is moving them carefully. Therefore, the value of professional movers is pivotal.

To keep the process smooth and on time, an organization should make sure to start six months before the required date. There are plenty of utilities which might be required to set up, parking arrangements and so on. Keeping all this in mind, professional moving services in Raleigh NC or nearby locations can help an organization keep the entire process well ordered and without any interruption to daily operations.

4.   Insurance is a must

As the term insurance suggests, getting the items insured with the moving company is essential. No organization would like to bear any losses during shifting, and a reputed moving company will surely provide coverage for the items in transport. However, the types of coverage might vary, and it’s a wise idea to discuss it while selecting a moving company.

In addition, as per law, Workers’ comp insurance is mandatory, and an organization should make sure that the company they are hiring has the coverage for their workers too. Of course, no business owner would prefer compensating for anyone getting hurt during the move.


Though the task is never easy for any individual, professional moving services in Raleigh NC, or any other area can definitely wipe the stress out. Advanced communication with employees, the moving company, and the hired manager for the task can ease the entire process.

read more


If you are renovating or planning your dream home, working with a professional interior designer brings expertise and skills into the project. Function and style are the most critical aspects of your interior design project since you want to come up with a stylish yet functional living space. If you have not worked with an interior designer or conducted interior construction before, this guide will help you understand the key aspects of an interior design process.

Strategic planning

So you have an interior construction or design project, and you have found your interior designer. The first step involves meeting them at the construction site and discussing your design needs and expectations. The interior designer needs to understand your lifestyle and everyday family life to create a functional design for your unique needs. It also involves getting an idea of your budget and goals to deliver a design within your reach financially.

Concept development

At this point, the interior designer is focused on solving your space issues. In the modern-day world, many homeowners are looking for open living spaces to enhance their lifestyles. Thankfully, it is possible to recreate new spaces and resolve issues with the existing space. If you are looking for an open space, an interior builder can recreate your space by knocking down walls to eliminate awkward spaces and so forth. Generally, this step involves getting the space planning right to develop a functional living space.

Design development

After the designer understands your goals and expectations, the creative process begins. The idea is to establish an interior design style that aligns with the architectural style of your property and improves the functionality of the space. It includes the selection of materials, flooring, finishes, wood pieces, etc. Having a detailed out drawing of the expected interior helps you visualize the end product and see if it meets your expectations. So basically, this step involves planning out and budgeting for everything to deliver the desired design.

Construction documentation

When you have approved the interior design, the designer facilitates detailed construction documents for the project. The construction documents inform the contractors involved, including carpenters, plumbers, flooring professionals, etc., of the things required to execute the design successfully. Additionally, construction documents are required to seek construction permits from the local authorities. The city’s construction authorities may require site plans showing the scope of the construction work. The designer facilitates all these construction documents to ensure the project aligns with the legal requirements.

Construction process

The final key step in interior design is implementing the construction work. The interior designer can do all the heavy lifting work for you, including applying for the construction permit. They also ensure that the construction and designing materials are outsourced correctly for a quality project.

After the project’s approval and the materials by the local authorities, the project kicks off. After constructing the interior, the designer helps you select accessories and furnishings for your new space, including lighting and furniture. They allow you to style your home until you achieve the desired interior design you want.

The final note

Since you will work closely with your interior designer uring the entire project, it is crucial to choose the one you feel compatible with.

read more
1 2 3 4 5 6 13
Page 4 of 13